Professional posters for your screens, created by AI in seconds.

Install ThePlayerAI on LG webOS Signage

Install ThePlayerAI on a professional LG webOS Signage display using USB or a server: requirements, SI Server settings and pairing.

Back to support — Installation guide

This guide is for professional LG Digital Signage displays. The IPK procedure does not apply to consumer LG TVs. Menus depend on the model and firmware; check your display’s manual.

Before you start

  • A compatible professional LG display supporting IPK installation through SI Server.
  • An internet connection and correctly set date and time.
  • For USB installation: a computer and a FAT32 drive. Back up the drive before formatting.

Download

com.lg.app.signage.ipk

Installation steps

  1. Download the IPK file

    Save com.lg.app.signage.ipk to your computer using the button below.

  2. Prepare the application folder

    Create an application folder at the root of the USB drive and copy com.lg.app.signage.ipk into it. The expected path is shown below.

  3. Open SI Server

    Connect the drive. Use the remote to open settings, then EZ Setting → SI Server Setting where this menu is available.

  4. Install from USB

    Set Application Launch Mode to Local and Application Type to IPK. Select Local Application Upgrade → USB, confirm and wait for completion.

  5. Restart and pair the screen

    After the completion message, turn the display off and on. Open ThePlayerAI if needed, note the pairing code and connect it to your account at app.theplayerai.com.

Choose a method

USB installation

File path on the USB drive: application/com.lg.app.signage.ipk

Server installation

Address to enter in SI Server: https://app.theplayerai.com/com.lg.app.signage.ipk

  1. Open SI Server

    Use the remote to open settings, then EZ Setting → SI Server Setting, depending on your model.

  2. Enter the server details

    Enable Fully Qualified Domain Name if available and enter the full IPK address shown below. Set Application Launch Mode to Local and Application Type to IPK.

  3. Start remote installation

    Choose Local Application Upgrade → REMOTE. Confirm and wait for the completion message before restarting.

  4. Pair your screen

    Turn the display off and on. Follow the pairing instructions in ThePlayerAI, then check your first playback from your account.

Troubleshooting

SI Server menu missing

Check that the display is a compatible professional model. Consult its manual or contact support; do not factory-reset it without diagnosing the issue.

Server download fails

Check the connection, date, time and full IPK address. Use the USB method to try a local installation.

USB installation or startup fails

Check the application folder and exact IPK filename. Restart the screen once installation finishes. If the issue persists, contact support with the model and firmware.

Check your first playback

Pair the screen with your account, send test content and check the display. The getting-started guide explains what to do next.

Need help?

Send support the device model, system version and the error message shown.